Deltec Calcium Reactors like many of Deltec's products are different from the normal items available on the marketplace.

With conventional non fluidised calcium reactors, as the media dissolves and breaks down, the fine particles are left to choke up the reactor and the water finds its own easiest route through. This results in tracking or channeling, where the contact area with the water ends up being very small leading to a rapid drop off in efficiency.

With the Deltec fluidised reactors the media is kept constantly moving so that it is impossible for tracking to occur and the whole of the media is utilised. Additionally the smaller grain size gives a much greater surface area for reaction with the water and any fine particles are either dissolved or flushed out of the reactor.

Most non fluidised calcium reactors can not achieve more than 35-45 dKh.

Through fluidisation Deltec Reactors can achieve a dKh in excess of 80 which corresponds to a significantly higher calcium level.

Unlike conventional reactors which require regular cleaning out, the Deltec models if used correctly should only require topping up with media.

• A cylindrical transparent container
• Circulation Pump
• Bubble Counter
• Optional Solenoid Valve
• Non Return Valve
• Provision for pH electrode
• Micro Filter
~Deltec PF500|CR/DC/PF500|~475~515~deltecproducts deltec~